const (
Magic32 uint32 = 0xfeedface
Magic64 uint32 = 0xfeedfacf
MagicFat uint32 = 0xcafebabe
)
var ErrNotFat = &FormatError{0, "not a fat Mach-O file", nil}
ErrNotFat is returned from NewFatFile or OpenFat when the file is not a universal binary but may be a thin binary, based on its magic number.
type Cpu uint32
A Cpu is a Mach-O cpu type.
const (
Cpu386 Cpu = 7
CpuAmd64 Cpu = Cpu386 | cpuArch64
CpuArm Cpu = 12
CpuPpc Cpu = 18
CpuPpc64 Cpu = CpuPpc | cpuArch64
)
func (i Cpu) GoString() string
func (i Cpu) String() string
type Dylib struct {
LoadBytes
Name string
Time uint32
CurrentVersion uint32
CompatVersion uint32
}
A Dylib represents a Mach-O load dynamic library command.
type DylibCmd struct {
Cmd LoadCmd
Len uint32
Name uint32
Time uint32
CurrentVersion uint32
CompatVersion uint32
}
A DylibCmd is a Mach-O load dynamic library command.
type Dysymtab struct {
LoadBytes
DysymtabCmd
IndirectSyms []uint32 // indices into Symtab.Syms
}
A Dysymtab represents a Mach-O dynamic symbol table command.
type DysymtabCmd struct {
Cmd LoadCmd
Len uint32
Ilocalsym uint32
Nlocalsym uint32
Iextdefsym uint32
Nextdefsym uint32
Iundefsym uint32
Nundefsym uint32
Tocoffset uint32
Ntoc uint32
Modtaboff uint32
Nmodtab uint32
Extrefsymoff uint32
Nextrefsyms uint32
Indirectsymoff uint32
Nindirectsyms uint32
Extreloff uint32
Nextrel uint32
Locreloff uint32
Nlocrel uint32
}
A DysymtabCmd is a Mach-O dynamic symbol table command.
type FatArch struct {
FatArchHeader
*File
}
A FatArch is a Mach-O File inside a FatFile.
type FatArchHeader struct {
Cpu Cpu
SubCpu uint32
Offset uint32
Size uint32
Align uint32
}
A FatArchHeader represents a fat header for a specific image architecture.
type FatFile struct {
Magic uint32
Arches []FatArch
// contains filtered or unexported fields
}
A FatFile is a Mach-O universal binary that contains at least one architecture.
func NewFatFile(r io.ReaderAt) (*FatFile, error)
NewFatFile creates a new FatFile for accessing all the Mach-O images in a universal binary. The Mach-O binary is expected to start at position 0 in the ReaderAt.
func OpenFat(name string) (ff *FatFile, err error)
OpenFat opens the named file using os.Open and prepares it for use as a Mach-O universal binary.
func (ff *FatFile) Close() error
type File struct {
FileHeader
ByteOrder binary.ByteOrder
Loads []Load
Sections []*Section
Symtab *Symtab
Dysymtab *Dysymtab
// contains filtered or unexported fields
}
A File represents an open Mach-O file.
func NewFile(r io.ReaderAt) (*File, error)
NewFile creates a new File for accessing a Mach-O binary in an underlying reader. The Mach-O binary is expected to start at position 0 in the ReaderAt.
func Open(name string) (*File, error)
Open opens the named file using os.Open and prepares it for use as a Mach-O binary.
func (f *File) Close() error
Close closes the File. If the File was created using NewFile directly instead of Open, Close has no effect.
func (f *File) DWARF() (*dwarf.Data, error)
DWARF returns the DWARF debug information for the Mach-O file.
func (f *File) ImportedLibraries() ([]string, error)
ImportedLibraries returns the paths of all libraries referred to by the binary f that are expected to be linked with the binary at dynamic link time.
func (f *File) ImportedSymbols() ([]string, error)
ImportedSymbols returns the names of all symbols referred to by the binary f that are expected to be satisfied by other libraries at dynamic load time.
func (f *File) Section(name string) *Section
Section returns the first section with the given name, or nil if no such section exists.
func (f *File) Segment(name string) *Segment
Segment returns the first Segment with the given name, or nil if no such segment exists.
type FileHeader struct {
Magic uint32
Cpu Cpu
SubCpu uint32
Type Type
Ncmd uint32
Cmdsz uint32
Flags uint32
}
A FileHeader represents a Mach-O file header.
type FormatError struct {
// contains filtered or unexported fields
}
FormatError is returned by some operations if the data does not have the correct format for an object file.
func (e *FormatError) Error() string
type Load interface {
Raw() []byte
}
A Load represents any Mach-O load command.
type LoadBytes []byte
A LoadBytes is the uninterpreted bytes of a Mach-O load command.
func (b LoadBytes) Raw() []byte
type LoadCmd uint32
A LoadCmd is a Mach-O load command.
const (
LoadCmdSegment LoadCmd = 1
LoadCmdSymtab LoadCmd = 2
LoadCmdThread LoadCmd = 4
LoadCmdUnixThread LoadCmd = 5 // thread+stack
LoadCmdDysymtab LoadCmd = 11
LoadCmdDylib LoadCmd = 12
LoadCmdDylinker LoadCmd = 15
LoadCmdSegment64 LoadCmd = 25
)
func (i LoadCmd) GoString() string
func (i LoadCmd) String() string
type Nlist32 struct {
Name uint32
Type uint8
Sect uint8
Desc uint16
Value uint32
}
An Nlist32 is a Mach-O 32-bit symbol table entry.
type Nlist64 struct {
Name uint32
Type uint8
Sect uint8
Desc uint16
Value uint64
}
An Nlist64 is a Mach-O 64-bit symbol table entry.
type Regs386 struct {
AX uint32
BX uint32
CX uint32
DX uint32
DI uint32
SI uint32
BP uint32
SP uint32
SS uint32
FLAGS uint32
IP uint32
CS uint32
DS uint32
ES uint32
FS uint32
GS uint32
}
Regs386 is the Mach-O 386 register structure.
type RegsAMD64 struct {
AX uint64
BX uint64
CX uint64
DX uint64
DI uint64
SI uint64
BP uint64
SP uint64
R8 uint64
R9 uint64
R10 uint64
R11 uint64
R12 uint64
R13 uint64
R14 uint64
R15 uint64
IP uint64
FLAGS uint64
CS uint64
FS uint64
GS uint64
}
RegsAMD64 is the Mach-O AMD64 register structure.
type Section struct {
SectionHeader
// Embed ReaderAt for ReadAt method.
// Do not embed SectionReader directly
// to avoid having Read and Seek.
// If a client wants Read and Seek it must use
// Open() to avoid fighting over the seek offset
// with other clients.
io.ReaderAt
// contains filtered or unexported fields
}
func (s *Section) Data() ([]byte, error)
Data reads and returns the contents of the Mach-O section.
func (s *Section) Open() io.ReadSeeker
Open returns a new ReadSeeker reading the Mach-O section.
type Section32 struct {
Name [16]byte
Seg [16]byte
Addr uint32
Size uint32
Offset uint32
Align uint32
Reloff uint32
Nreloc uint32
Flags uint32
Reserve1 uint32
Reserve2 uint32
}
A Section32 is a 32-bit Mach-O section header.
type Section64 struct {
Name [16]byte
Seg [16]byte
Addr uint64
Size uint64
Offset uint32
Align uint32
Reloff uint32
Nreloc uint32
Flags uint32
Reserve1 uint32
Reserve2 uint32
Reserve3 uint32
}
A Section32 is a 64-bit Mach-O section header.
type SectionHeader struct {
Name string
Seg string
Addr uint64
Size uint64
Offset uint32
Align uint32
Reloff uint32
Nreloc uint32
Flags uint32
}
type Segment struct {
LoadBytes
SegmentHeader
// Embed ReaderAt for ReadAt method.
// Do not embed SectionReader directly
// to avoid having Read and Seek.
// If a client wants Read and Seek it must use
// Open() to avoid fighting over the seek offset
// with other clients.
io.ReaderAt
// contains filtered or unexported fields
}
A Segment represents a Mach-O 32-bit or 64-bit load segment command.
func (s *Segment) Data() ([]byte, error)
Data reads and returns the contents of the segment.
func (s *Segment) Open() io.ReadSeeker
Open returns a new ReadSeeker reading the segment.
type Segment32 struct {
Cmd LoadCmd
Len uint32
Name [16]byte
Addr uint32
Memsz uint32
Offset uint32
Filesz uint32
Maxprot uint32
Prot uint32
Nsect uint32
Flag uint32
}
A Segment32 is a 32-bit Mach-O segment load command.
type Segment64 struct {
Cmd LoadCmd
Len uint32
Name [16]byte
Addr uint64
Memsz uint64
Offset uint64
Filesz uint64
Maxprot uint32
Prot uint32
Nsect uint32
Flag uint32
}
A Segment64 is a 64-bit Mach-O segment load command.
type SegmentHeader struct {
Cmd LoadCmd
Len uint32
Name string
Addr uint64
Memsz uint64
Offset uint64
Filesz uint64
Maxprot uint32
Prot uint32
Nsect uint32
Flag uint32
}
A SegmentHeader is the header for a Mach-O 32-bit or 64-bit load segment command.
type Symbol struct {
Name string
Type uint8
Sect uint8
Desc uint16
Value uint64
}
A Symbol is a Mach-O 32-bit or 64-bit symbol table entry.
type Symtab struct {
LoadBytes
SymtabCmd
Syms []Symbol
}
A Symtab represents a Mach-O symbol table command.
type SymtabCmd struct {
Cmd LoadCmd
Len uint32
Symoff uint32
Nsyms uint32
Stroff uint32
Strsize uint32
}
A SymtabCmd is a Mach-O symbol table command.
type Thread struct {
Cmd LoadCmd
Len uint32
Type uint32
Data []uint32
}
A Thread is a Mach-O thread state command.
type Type uint32
A Type is the Mach-O file type, e.g. an object file, executable, or dynamic library.
const (
TypeObj Type = 1
TypeExec Type = 2
TypeDylib Type = 6
TypeBundle Type = 8
)